Marble Buying Checklist—Not Just a Purchase, an Arslan Stonex Guarantee
Marble is not just a stone; it is the pride of every home. Choosing it correctly is a big challenge in itself. While the right selection of marble increases the beauty of your home millions of times, a slight carelessness or wrong choice can dull the charm of your dream palace.
I am Arslan, from Kishangarh (India). As a leading natural stone supplier in India, I have brought the essence of my years of experience for you in the form of a ‘guide’.
My goal is not just to sell stone, but to show you the right path and ensure the highest quality with almost ‘zero wastage’. To ensure that your hard-earned money and your investment become a great success, be sure to follow this checklist before buying stone:
“No more confusion in choosing marble! For better information, must check out our blog ‘Best Marble and Granite for Indian Homes’.”
Pre-Purchase Preparation – The Arslan Stonex Planning Mantra
My years of experience tell me that 90% of wastage happens only because of poor planning. Whenever you come here to Kishangarh, understand some points well before leaving for shopping; otherwise, financial loss is certain.
Measurement and Planning: Right Start is the Key to Savings
1. The 10% Rule (Need + 10%)
First of all, take an accurate measurement of the total area according to your need. Apart from this, carry 10% extra material of the total measurement. This extra stone covers the shortage occurring during cutting, grinding, molding, and pattern matching. Most importantly—it is very difficult to find material of the same lot again if the material falls short in the middle of the work, so taking 10% extra is wise.
2. Expert Measurement and Modern Technology
If you are buying stone for a kitchen countertop, pillar cladding, or any special design, get the proper area calculated by an expert. Use on-site laser measurement or digital templating for this so that you don’t face any problem during fitting later.
3. Arslan’s Expert Advice
I always advise taking the help of a professional artisan or contractor for measurement, who has proper knowledge of stone cutting and wastage. A small mistake can spoil your entire budget.
Selection by Application: Right Stone, Right Place
Remember, not every stone belongs everywhere.
Choosing the Right Stone for the Right Place: My Special Advice
People often get confused in the selection of marble and granite. Remember, every stone is made for a specific place:
1. Exterior & Heavy Use
For exterior parts or where there is a lot of movement, my advice is that you use only and only granite.
- Caution: Choose only 100% natural granite here, such as: P-White, Cheema Pink, or Rosy Pink.
- Warning: Never use ‘converted’ (artificially coloured) granite, such as some River Black or Brown Granite. With time and because of sunlight, their color fades and your hard work goes to waste.
2. Indoor Use
Inside the house, you can use both marble or granite according to your choice.
- Rough and Tough Area: For kitchen countertops or places where there is more work, granite is the best option.
- Premium and Luxurious Look: For the internal parts of the house, Italian marble and premium Indian marble are the best.
3. Budget and Options
The look of Italian marble is wonderful, but its price is very high which does not fit in everyone’s budget. In such a situation, Indian marble (like Green or White marble of Kishangarh) is a very great and affordable option, which gives beauty and is not heavy on the pocket.
“When you are coming to Kishangarh, do read our ‘Kishangarh Marble Market Buying Guide‘ once, so that you can avoid every type of deception and fraud and take the right stone for your hard-earned money back home.”
The Quality Checklist – Our Secret Formula
When you step into our showroom or godown, you are not just buying a stone—but you are trusting its strength and purity .
Before finalizing any stone, check these 5 main points. These are not just 5 points, but they are ‘Brahmastra’ which are fully capable of protecting you from every type of fraud and deception happening in stone purchase:
1. Cracks and Fissures (Flaw Check)
Arslan Stonex Standard: We understand natural lines, but reject deep, through-and-through cracks. Our AI-driven QC system flags these instantly. Why it Matters: Deep cracks can cause the slab to shatter during handling or cutting, resulting in 100% loss of material.
2. Polishing (The Gloss Factor)
Arslan Stonex Standard: View the polished surface at an angle. The polish should be mirror-like. There should be no dull or patchy spots. Why it Matters: Poor polish means your installer will have to do extra work (and cost) on-site.
3. Thickness (The Consistency Test)
Arslan Stonex Standard: All slabs must have perfectly uniform thickness (e.g., 18mm). We ensure this with our automated machinery. Why it Matters: Uneven thickness makes installation difficult, leading to unnecessary wastage from grinding edges to match.
4. Colour and Veining (Vein Matching)
Arslan Stonex Standard: Always view slabs from the same block/lot laid out together. This is crucial for seamless book-matching.
Why it Matters: If colours and veins don’t match, you must make extra cuts to correct the design.
5. Reinforcement
Arslan Stonex Standard: For Italian Marble, the correct application of epoxy and mesh (netting) on the back is vital for strength.
Why it Matters: Poor meshing or over-repair shows the stone was inherently weak, increasing the risk of breakage during shipping and installation.
Note- Getting an official receipt from the Kishangarh Marble Association before buying marble helps protect you from fraud and provides support in case of any dispute.
Phase 3: Understanding Cost, Value, and Smart Spending
“We understand well that the price of Italian marble in India is a big factor for customers. That’s why, our objective is not just to make a sale, but to give you the right value and quality.”
Value vs. Price (Where to Spend)
The most expensive marble is not always the best fit.
Choosing Right According to Budget and Need
1. Best for Indian Climate and Budget
If you are looking for a marble that is completely suitable for our climate and most importantly—which is also according to your budget, then you can move towards Green Marble in Kishangarh. This is a marble whose demand is always maintained in foreign markets more than the Indian market. If you want excellent strength in a low budget, our first advice will be this.
2. For Premium and Luxury Look
On the other hand, if you want to give a premium, grand, and ‘Royal Look’ to your home, then Italian marble will be the best option for you. This stone takes your lifestyle and the grandeur of the house to a different level altogether.
Arslan Stonex Special “Cut-to-Size” Solution: Direct Savings of up to 15%
We know that stone wastage weighs heavy on your budget. Therefore, Arslan Stonex has brought modern AI-guided CNC machines:
- Our Promise: You give us the accurate measurement of your site, and our machines will cut the stone in that exact size.
- Your Benefit: You pay only for as much stone as you use. This reduces cutting noise and dust at the site, and you can save up to 15% in your total budget.
Final Word: The Arslan Stonex Promise
Marble Buying Checklist is an emotional and financial investment. Our team is here not just to supply stone, but to empower your decision. As a trusted natural stone supplier in India, the Arslan Stonex promise is clear:
- Precision powered by AI.
- The human touch of Craftsmanship.
- A target of Zero Wastage.
We don’t just supply slabs. We supply confidence—and quality that lasts.
Start Your Marble Journey
Are you ready to see the finest Green Marble in Kishangarh, or rely on the expertise of a trusted Granite Slab Supplier in India?
Before finalizing your purchase, explore the 2026 Stone Market Decoded: Your Manual Price Guide to Marble & Granite in India to avoid overpaying and quality compromises.
Arslan Stonex: The Symbol of Trust & Transparency (FAQs)
Q1. Why do we always recommend buying 10% extra marble?
At Arslan Stonex, we recommend 10% extra marble because marble is a natural stone. During cutting and vein matching, some wastage is unavoidable. If material falls short during installation, getting the same lot with matching colour and pattern is very difficult. Buying extra ensures a uniform and premium finish across the entire flooring.
Q2. What is the risk of buying very cheap marble or granite from the market?
From our experience, extremely cheap stone is often converted (artificially coloured) or heavily repaired. It may look glossy at first, but with sunlight and time, the colour fades and cracks begin to appear. That is why at Arslan Stonex, we deal only in 100% natural stone with no artificial shortcuts.
Q3. What is the strongest and most suitable option for kitchen countertops?
We consider natural granite the best choice for kitchen countertops. Granite can easily handle heat, scratches and daily rough use. Compared to marble, it is more resistant to stains from oil, turmeric and lemon. This is why we strongly recommend granite for kitchens.
Q4. What should we check while buying Italian marble?
When selecting Italian marble, we always advise checking technical quality along with appearance. The slab thickness should be uniform throughout, usually the standard 18mm. The epoxy mesh at the back must be strong to prevent cracking during installation. At Arslan Stonex, every Italian marble slab goes through strict quality checks before dispatch.
Q5. Is Indian marble a good alternative to Italian marble?
Yes, Indian marble can be an excellent alternative. White and green marble from Kishangarh are known for their strength and durability. If you want a royal look within a controlled budget, Indian marble is a practical and long-lasting option, especially suitable for Indian climate conditions. We confidently recommend it at Arslan Stonex.
Q6. How can we reduce stone wastage during installation?
The best way to reduce wastage is precision cutting. When stone is supplied cut-to-size as per exact site measurements, on-site cutting is minimized. This saves money and also reduces dust at home. With our CNC cutting facilities at Arslan Stonex, clients can save up to 15% on material costs.
Q7. How can we avoid fraud while buying stone from Kishangarh?
We always advise buyers to ask for an official Kishangarh Marble Association receipt and remain present during loading to ensure the same selected lot is being dispatched. The safest option is to work with a trusted supplier like Arslan Stonex, where transparency and quality are standard practice.
Contact Now…
